KM11GM-3R Grain Mill with 11 lb. Hopper and 3 Rollers

Heavy-duty Three Roller Grain Mill with Adjustable Secondary Gap Spacing The KM11GM-3R Grain Mill is perfect for large batches and high efficiency milling. With three rollers, all your grain will be crushed twice in one cycle. The initial crush is through the fixed gap between the top two rollers, and then the grain passes through the second gap between the drive roller and the adjustable bottom third roller. The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage. The aluminum hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on stainless steel ball bearings. The drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible. A hand crank is included, but the mill can be easily motorized with a corded electric drill. You don’t need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of .070′. Adjusting is simple – just loosen the adjustment screws, adjust the gap and tighten the adjustment screws. You will need to supply or build a base to set the mill over a grain bin or 5 gallon bucket. Features 6′ long adjustable gap Fully adjustable mill 0.060 fixed primary gap, 0-0.065 fully-adjustable secondary gap Dual eccentric adjusters built from stainless steel for no galling 8 lbs / minute is average throughput 6′ x 1.5′ diameter steel rollers Crankshaft can be turned clockwise or counterclockwise Durable alloy frame Stainless steel ball bearings