Led Strip Lights 16.4ft 5050 RGB LED Tape Lights with IR Remote, Color Changing IP65 Waterproof 150 LEDs Rope Lights Kit for Home Lighting Kitchen Bed

Size:5050-1-30APPLIGHTING SMD5050 RGB LED Strip Lights Please contact with us if our SMD5050 LED strip light can not work or has other problem, We would help you solve any problems. Package Lists (Full Kit)_ 1 x 5M/16.4ft 5050 RGB LED strip 1 x 44-key IR remote controller 1 x IR sensor box 1 x 12V power supply 1 x User manual2 x 4pin connector The light strip is 12V DC, extremely low heat. It is touchable. Installation Instructions: Clean the surface you intend to stick the light strip to Peel off the backing strip off the adhesive tape Press and hold the light strip firmly against the surface Connect the 4-Pin input of the light strip to the 4-Pin output of the Controller Connect the DC jack output of the power adapter to the DC jack input of the Controller Remove the tab from the battery compartment of the remote control Connect the power supply to your wall outlet DIY function: About DIY function, Please follow the steps below_ Step 1: Turn on the lights. Press one of the RGB buttons. For example, press red button if you want to DIY red color. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: Press and hold green and blue down arrow buttons, the lights will start changing. Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs. Tips: 1)The arrows should be connected on the same line when you connect the strip lights. 2) In case of overheating, please spread out the LED strip before connecting the power supply. Do not hesitate! Click ÒAdd to Cart’ and BUY IT NOW!!!