Led Strip Lights, 32.8ft Led Strip Lights, Upgraded 44key RF Remote Controller, 12V Safety RGB Color Changing SMD 5050 300 LEDs Waterproof Rope

Led Strip Lights, 32.8ft Led Strip Lights, Upgraded 44key RF Remote Controller, 12V Safety RGB Color Changing SMD 5050 300 LEDs Waterproof Rope Lights for Home Outdoor Lighting Decoration Information The strip lights are IP65 waterproof with 20 colors changing. 8 light modes: Quick/ Slow/ Auto/ Flash/ 3 color jumpy change/ 7 color jumpy change/ 3 color fade change/ 7 color fade change. DIY setting_You can get the unique color you need by control R/G/B increase and decrease. It work well for indoor and outdoor lighting decoration, such as kitchen, under cabinet, dining room, bedroom,TV Backlighting, automobile, mirror, balcony,party, patio, automobile, wedding, etc. Specifications Strip length: 32.8FT/10M IP65 Waterproof LED Quantity: 300 LEDs (30LED/m) LED type: SMD 5050 LED Beam angle: 120 degrees Input voltage: 12V DC Lifespan: over 50 000 hrs Power: 0.2w/led Working Current: 5A Working Temperature: -20_ to 50_ Esay to Use _Arrow to arrow: The arrow between the remote contrlloller and the strip must be arrow to arrow. _Please remove the plastic film of controller before use. _Peel off the surface of the 3m glue, then stick the light strip to the place you want to stick. _Connect the receiver to the USB cable and the light strip. And plug the plug into the socket. Note: 1. The arrows should be connected on the same side. If not, it wonÕt work. 2. Please make sure the surface you want to stick the light is clean, flat and dry. 3. You can cut the light at the cut marks. Please make sure the power off first, then cut the light strip. And if you cut them, The cut part will not be used. Included: 2x 16.4FT LED Strips light 1x RF remote controller 1x RF receiver 1x Power Adapter 1x Plug 6 x clips 1x User’s Manual